I/O Modules - Honeywell Touchpoint Pro Technical Handbook

TECHNICAL SPECIFICATIONS

21.6 I/O Modules

21.6.1 Common Specifications
Dimensions
Installation
Maximum wire size
IP Rating
EMC
Power supply
Casing material
Operating Temperature Range
Storage Conditions
Operating Humidity Range
Weight
Environmental Protection Class Equipment Class III, Installation Cat 2, Pollution Degree 2
21.6.2 Analogue Input Module mA
Description
Sensor Configuration
Signal Measurement Range
Supply Voltage
Field Device Supply Voltage
Single Channel Field Device
Supply current
Total Field Device supply
current
Power Consumption
Power Dissipation
Sense Resistance
Connector Coding
Part. No. 2400M2501_6
35.0 mm x 99.5 mm x 114.5 mm (W x H x D)
May be fitted to 5, 7, 9 or 10-way Communication / Power Rail
2
2.5 mm
IP20
EN 50270
18 – 32 VDC
Polyamide PA 6.6 V0 (UL94)
–40 °C to +70 °C
–40 °C to +70 °C
10 to 90 %RH (non–condensing)
210 g
4-channel 4 – 20 mA Analogue Input Module with two or three-wire interface to
detector
4 x two-wire or three-wire sink only (current sourced from detector)
0 – 25 mA
18 – 32 VDC (Supplied from Self Enclosed Low Voltage source only)
Supply Voltage (Vs) – 0.7 V
Maximum 1 A
Total Maximum current : 2 A at 70 °C ambient
Total Maximum current : 4 A at 60 °C ambient
0.8 W (Excluding sensor supply)
Maximum 3.7 W, at 4 A total field device load
Maximum 2.1 W, at 2 A total field device load
101 Ω
Analogue Input Module connectors (TB1–TB4) have coding keys to avoid
incorrect wiring
174
Touchpoint Pro
Technical Handbook