Honeywell Touchpoint Pro Technical Handbook page 192

24.3.5 TPPR Power Supply Units

Casing – Back case: Aluminium; Top case (with mesh): Steel with Nickel plating

Contents – printed circuit boards (PCB)
24.3.6 TPPR Ring Coupling Module

Casing – Polyamide PA 6.6 V0 (UL94), green

Contents – printed circuit boards (PCB)
24.3.7 TPPR Backplanes

Backplane Assemblies (i.e. PCB)
24.3.8 TPPR Packaging
TPPR outer packaging will be cardboard for wall-mounted units and ISPM15 certified 19 mm solid (not machined) woods for
floor standing units. Facilities for recycling are widely available.
TPPR wall-mounted enclosure inner packaging is made from Stratocell
®
Stratocell where such recycling facilities exist.
TPPR floor standing units may be shipped on ISPM15 certified wooden pallets that may be reused, recycled or returned.
Part. No. 2400M2501_6
SAFE DISPOSAL
Figure 106. ISPM15 Pallet Mark Example
185
®
foam. The foam can be recycled and reused as
Touchpoint Pro
Technical Handbook