Qcs System Setup And Debug - Honeywell Experion MX Operator's Manual

4.2.1

QCS System Setup and Debug

The QCS System Setup and Debug popup is used to change several QCS- specific settings
and to invoke other debug windows. The buttons available on this popup depend on the
Button Description
Group – Call up the group display for the selected object. If there
is no associated group display, this button invokes the group
command and requires a group number to be entered.
Trend – Call up the trend display for the selected object. If there is
no associated group display, this button invokes the trend
command and requires a trend number to be entered.
Mini-Profile opens the Mini-Profile dialog box.
Mini-Trend opens the Mini-Trend dialog box.
Simple Recipe Change Button – Lets the operator to load the new
recipe
The Scan button moves the sensor to an on-sheet status.
Scanner Control opens the C-Frame Control display.
Offsheet moves the sensor to an Offsheet status.
About Station opens a display listing version and copyright
information.
Help opens the Help file.
Exit Station exits the station.
6510020335
EXPERION MX RAE STATION LAYOUT
78