How To View Output Channels - Honeywell Touchpoint Pro Technical Handbook

13.9 How to View Output Channels

In the Touchscreen view, the Inputs and Outputs icons toggle – from the System Status screen navigation bar only the
Inputs icon is visible; selecting the Inputs icon makes the Outputs icon visible.
1. From the System Status screen navigation bar, select the Inputs icon and then the Outputs icon.
2. A list of all output channels is shown in order of Channel ID with its location tag and status as shown below:
Select the Filter icon to filter by status – Fault, Inhibit, Warning or All, as shown below:
3.
4. Select a channel. Depending on your access level, a number of options may be shown:
Part. No. 2400M2501_6
NORMAL OPERATION
Figure 88. Input Details Screen
Figure 89. Outputs Screen
Figure 90. Outputs Screen with filter options
113
Touchpoint Pro
Technical Handbook