Honeywell Touchpoint Pro Technical Handbook page 95

TPPR allows the fault and inhibit conditions to be included in the vote, simply by checking the options for those inputs.
ID/Location
Select All
i01 Channel 1
i02 Channel 2
i03 Channel 3
i04 Channel 4
At least One Alarm
Then the output may be activated as follows:
Channel 1
AL1
Fault
Fault
Inhibit
9.6.6 Requiring At Least One Alarm
When faults and inhibit conditions are included in the cause and effect logic, it may be possible to activate an output with
Fault and Inhibits only. Using the above cause and effect example:
Channel 1
Fault
Fault
Normal
Part. No. 2400M2501_6
CONFIGURATION
AL1 AL2
Enabled
Channel 2 Channel 3
AL1 AL1
AL1 AL1
AL1 Inhibit
AL1 AL1
Channel 2 Channel 3
Fault Fault
Don't care
Inhibit
Fault Inhibit
AL3 FLT
Vote Count
Channels Selected:
Channel 4 Count
Don't care
AL1
AL1
Normal
Channel 4 Count
Don't care
3
Fault 3
Fault 3
88
INH WRN
4
Output State
3 Activated
4 Activated
4 Activated
2 Not Activated
Output State
Activated
Activated
Activated
Touchpoint Pro
Technical Handbook