Appendix; Graphical Symbols, Safety Signs And Product Safety Labels On The Postbase One Franking System - FP PostBase One Operator's Manual

Appendix

Graphical symbols, safety signs and product safety
labels on the PostBase One franking system
The following graphical symbols, safety signs and product safety labels may be used
on the PostBase One franking system for example, depending on the respective
version. You will find the product safety labels on the type plates of the individual
products.
The following overview lists and explains them.
Warning: Mind Your Hands.
This safety sign is used to identify hazardous areas of the franking system
where injury to the hands might occur.
GS Mark. "Geprüfte Sicherheit" (Tested safety) according to the require-
ments of the German Product Safety Act (ProdSG).
Tested by the accredited laboratory NEMKO.
CE label.
With this label, the manufacturer declares that the product meets the
requirements of all relevant EU directives that require such labelling.
The corresponding EU Declaration of conformity of the manufacturer for
the PostBase One franking system is printed on page 184.
Nemko certification mark.
The approval mark indicates that the product complies with the applicable
standards as required in the USA and Canada.
Nemko-CCL is a NRTL (nationally registered testing lab), which is entitled
to perform this test. Product tested in accordance with IEC 60950-1.
The crossed garbage can is a mark for electrical and electronic equip-
ment (WEEE directive) and means the following:
The product may not be disposed of with household waste.
The bar below the garbage can indicates that the product was marketed
after 13 August 2005.
For proper disposal and recycling of the PostBase One franking system,
please contact the FP aftersales service.
Appendix – Graphical symbols, safety signs and product safety labels ...
145