FP PostBase One Operator's Manual page 154

154
PostBase One Franking System
Dismantling the PostBase One franking system
Remove ink cartridges / remove print heads and ink tank (PostBase One Bulk Ink)
You only need to remove the ink cartridges /
print heads and the ink tank if you move the
franking system to another location or when
it is brought to service.
During a transport within a building, the car-
tridges / print heads and the ink tank may
remain in the franking machine.
PostBase One with ink cartridges:
• Start the exchange procedure to remove
the ink cartridges. Please refer to
chapter 15.3 on page 101.
• Mark cartridges (left / right) and pack them
separately. Best suited are plastic bags.
• Close the flap.
• Confirm all error messages (e.g. on miss-
ing ink cartridges).
PostBase One Bulk Ink:
• Start the exchange procedure to remove
the print heads and the ink tank. Refer to
chapter 15.4 on page 106.
• Mark print heads (left / right) and pack
them separately. Best suited are plastic
bags.
• Follow the instructions how to remove the
ink tank on page 114.
• Pack up the ink tank (plastic bag).
• Close the flap.
• Confirm all error messages (e.g. on miss-
ing print heads).