Adjusting Moistening (Postbase One With Sealer); Remote Services - FP PostBase One Operator's Manual

98
PostBase One Franking System

Adjusting moistening (PostBase One with sealer)

14.15
PostBase One monitors the operational conditions of the sealer. Upon system start,
as well as occasionally during operation, sealing liquid from the tank is pumped to the
moistening sponge. Thus, PostBase One makes sure the sponge is always properly
wetted. You only need to adjust the moistening if the envelope flaps are moistened
too little or too much.
Functions and settings of the M
14.16

Remote Services

With the 'Remote Services' function, PostBase One connects to the FP server and
checks for updates (e.g. a new rate table, new machine software). Diagnostic data is
also exchanged with the FP server.
• Open the M
• Choose M
• Use M
• S
menu and their meaning:
OISTENER
M Increase moistening of envelope flaps.
ORE
S Restore default moistening level.
TANDARD
L Decrease moistening of envelope flaps.
ESS
S P If moistening has been enabled on the
TART UMP
sealer, sealing liquid from the tank will imme-
diately be pumped to the moistener.
• Open the M
• Choose R
PostBase One starts the update procedure.
It takes some time to establish the connec-
tion and to exchange data. Please stand by.
.
ENU
.
OISTENER
or L to adjust the moistening.
ORE ESS
the displayed setting.
AVE
.
ENU
S
EMOTE ERVICES
.