Changing The Print Heads (Postbase One Bulk Ink) - FP PostBase One Operator's Manual

106
PostBase One Franking System

Changing the print heads (PostBase One Bulk Ink)

15.4
PostBase One monitors the status of the print heads and issues a message when
they must be replaced.
We recommend that you always have a new FP print head kit in stock
We advice to clean the contacts in the print head bracket at each print head replace-
ment. Use the special 'clean & renew' cleaning kit for ink-jet print systems, available
at Francotyp-Postalia.
Warning! Ingestion of the ink can be hazardous. Avoid contact with the eyes.
Keep the print heads away from children. Further instructions for use are
enclosed with the print heads.
Caution! To ensure proper imprints, please heed the following instructions
when handling print heads:
• Use up within 12 months after opening the vacuum packaging.
• Always keep unprotected nozzles facing down.
• Handle with care when without nozzle protection.
Caution! Heed the following tips to avoid damage to the print system:
• Do not yank the cartridge flap open. Run the C
from the P
• We recommend to use only approved FP equipment and FP original parts.
The manufacturer FP has established reliability, safety and applicability.
The manufacturer cannot assess the reliability, safety and applicability for
products not approved by FP, and therefore not vouch for such products.
• Always replace the print heads in pairs. Only insert new print heads.
Caution! There could be ink residues on the used print heads and the hose
couplings.
• Take care not to soil your skin, your clothes, or objects near by.
• Wipe the hose couplings with an absorbent cloth immediately after
disconnection.
• Use a mat to place the print heads.
S menu. The flap then opens by itself.
RINT YSTEM
C
HANGE ARTRIDGES
function