Safety Cap Has Been Released - Letter Transport Stops - FP PostBase One Operator's Manual

143
Tips for troubleshooting
16.5 Safety cap has been released – letter transport stops
The safety cap helps to avoid injury that may
be caused by improper handling within the
letter exit of the franking machine.
When the safety switch is activated, the
safety cap is released and the letter transport
stops immediately. An error message is
issued, informing you about the problem.
• Remove the cause which led to the activa-
tion of the safety switch.
• Snap the safety cap back into place.
Safety cap
Warning: Mind Your Hands! By no means
must you try to block or fasten the safety cap.
Any fastening of the safety cap prevents it
from being released in the case of a jam or an
unauthorised interference, thus rendering the
whole safety switch concept inoperative.