Switch Pc Software Mode On / Off - FP PostBase One Operator's Manual

14.11

Switch PC Software Mode on / off

You can set up the franking system in such a way that franking is only possible when
connected to a PC and special FP software for PostBase franking systems (PostBase
NavigatorBasic / NavigatorPlus or MailReport for PostBase). Thus, you can make
sure that all frankings are registered on the PC for reporting and analysis purposes.
For information on NavigatorBasic / NavigatorPlus and MailReport, please visit our
website or contact your local sales agent.
Advanced settings & system information
Disable access control
Caution! If you disable access control, all
users will be deleted without prior warning.
• Open the M .
ENU
• Choose M
ANAGE
• Confirm the prompt with C
Access control is disabled.
• Open the M .
ENU
• Choose PC S
OFTWARE
PostBase One opens the adjustment menu
for the PC Software Mode. The current set-
ting is shown on a dark background.
• Select the desired setting.
• S the setting shown.
AVE
PIN.
.
ONTINUE
M .
ODE
93