FP PostBase One Operator's Manual page 160

160
PostBase One Franking System
On the dynamic scale (back cover)
Separate the components of the franking system
Housing
connector
On the sealer (back cover)
On the feeder (back cover)
Franking machine
• Remove the connection cable of the
sealer / feeder: Unscrew and carefully pull
off the plug.
• Pull out power cable.
• Remove the power supply unit.
• Remove the connection cable of the
feeder: Unscrew and carefully pull off the
plug.
• Pull out power cable.
• Remove FSCP plug (termination plug):
Unscrew and carefully pull off the FSCP
plug.
• Slightly lift the franking machine and move
it to the right.
• Slightly lift the dynamic scale and move it
to the right.
• Slightly lift the sealer and move it to the
right.