Cleaning The Print System; 15.7.1 Starting Automatic Print System Cleaning - FP PostBase One Operator's Manual

118
PostBase One Franking System
15.7

Cleaning the print system

15.7.1 Starting automatic print system cleaning

You should start automatic print system cleaning only if the quality of the imprint is
not good enough (e.g. blank spots in the imprint after longer periods out of use).
Cleaning
• Open the M .
ENU
• Choose P S
RINT
• Choose C
LEANING
A message informs you about the cleaning
process in progress.
• Check the quality of the imprint with a test
print (see page 29).
Intensive cleaning
You should start intensive cleaning if normal
cleaning fails to improve the print quality to
your satisfaction.
• Open the M .
ENU
• Choose P S
RINT
• Choose I
NTENSIVE
A message informs you about the cleaning
process in progress.
• Check the quality of the imprint with a test
print (see page 29).
When the print system is heavily stained, it is
possible that even intensive cleaning proc-
ess does not improve the print quality as
expected. In such cases, it may help to man-
ually clean the ink cartridges / print heads
(see page 119).
.
YSTEM
.
.
YSTEM
C .
LEANING