FP PostBase One Operator's Manual page 52

52
PostBase One Franking System
Adjust the letter path to the letter thickness
Dynamic weighing YES / NO
Adjust separation
Sealing function ON / OFF
Setting up the feeder
• Adjust the letter path to the thickness of the
mail pieces to be processed.
Letter thickness:
– 2 mm
– 3 mm to 5 mm
– more than 5 mm
(See also chapter 3.5.1, page 16.)
• If necessary, check / adjust the separation
settings. Please refer to chapter 3.5.2,
page 17.
Switching the sealing function on / off
(PostBase One with sealer)
• On the sealer: Turn the envelope sealing
switch to the corresponding position.
Moisten / seal letters
(sealing function ON)
Sealing function OFF
(See also chapter 3.6, page 21.)
Check the dynamic scale's status
(PostBase One with dynamic scale)
If you want the dynamic scale to detect letter
size and weight:
• Make sure that the product is set to
'Dynamic'.
Only when the Home screen shows the
icon as the current weighing mode, the
'dynamic weighing' function is active. Other-
wise the dynamic scale only transports let-
ters.
Letter path:
Narrow
Medium
Maximum
SEAL
NON
SEAL