FP PostBase One Operator's Manual page 90

90
PostBase One Franking System
Connectivity Settings and their meaning:
Connection Type
E
THERNET
(default setting, not changeable)
DHCP
DHCP = E
(default setting)
DHCP = D
Proxy-Server
P = D
ROXY
(default setting)
P = E
ROXY
/ LAN
NABLED
ISABLED
ISABLED
NABLED
LAN connection. PostBase One connects to the
Francotyp-Postalia Infrastructure (FPI) via the
internet.
Dynamic Host Configuration Protocol. Network-
ing protocol that allows automatic connection to
a network.
Select this setting if your network supports
DHCP.
Select this setting if your network does not sup-
port DHCP.
During manual configuration, you will need to
enter the following parameters:
– Static IP address for your PostBase One
– Subnet mask
– Default gateway
– IP address of the DNS server.
Please contact you network administrator for
details.
Note: When entering IP addresses, you have to
enter the dots, too.
Intermediary server that facilitates access to the
internet.
Select this setting if your network does not use a
proxy server.
Select this setting if your network uses a proxy
server.
You will need to enter the following parameters:
– IP address of the proxy or its alias
– Port number.
Please contact you network administrator for
details.