FP PostBase One Operator's Manual page 155

Switch off
3 seconds
Empty the sealant tank
Appendix – Moving the PostBase One to another location
• Switch off the franking system.
• Empty the label dispenser.
• Switch off connected external devices
(e.g. PC).
• Pull the power plugs of the franking
machine, as well as all components con-
nected to it (feeder, power supply unit of
the sealer, ...) from the socket(s).
• Pull the Ethernet cable from the network
connection.
• Open the lid: Press on the marker, then
flap down the lid.
• Pull out the yellow plug of the sealant tank.
155