FP PostBase One Operator's Manual page 166

166
PostBase One Franking System
Mounting the envelope slide
Insert the catch brackets
On the power sealer
On the franking machine
If you use a power sealer:
• Attach the appropriate envelope slide to
the power sealer. Both hooks of the enve-
lope slide must snap into the housing of the
power sealer.
If you do not use a power sealer:
• Position the envelope slide (standard ver-
sion for systems without power sealer) on
the connector as shown in the illustration
and push it back firmly. You will feel the
envelope slide lock into place.
• Push the catch bracket into the slot of the
envelope slide from the right.
• Push in the back bracket.