5.3.2.2 Positioning Letters In Stack - FP PostBase One Operator's Manual

5.3.2.2 Positioning letters in stack

PostBase One is ready to frank
Letter upper edges
If the desired product is set and the Home
screen shows the Postage or Auto, you can
position mail pieces on the feeder to frank.
• Arrange the letter stack:
– the side to be printed faces the back
– envelope flaps face the bottom (enve-
lopes stand on their upper edges).
• Align upper edges flush:
Loosen letter stack with the upper edge on
a level base and shake smooth.
Do not place too many letters on the feeder.
The pressure bar should have about 5 mm
clearance.
• Grab the pressure bar in the grip recess
and pull it to the front.
• Place the letter stack on the letter guide
near the separation rollers. Make sure that
all letters stand on the letter guide on their
upper edges.
• Push the pressure bar against the letter
stack.
The batch procedure starts automatically.
The letters are separated from the stack,
moistened and sealed (if the moistening fea-
ture has been enabled), franked, and stacked
in the catch tray – ready for dispatch.
53
Franking