FP PostBase One Operator's Manual page 104

104
PostBase One Franking System
• Remove the sticker.
Caution! Do not touch the nozzle surface.
Always keep unprotected nozzles facing
down. Handle cartridges without nozzle
protection with extreme care.
• Carefully remove the nozzle protection.
• Hold the ink cartridge with its connectors
facing backwards, i.e. towards the back of
the franking system.
• Insert the ink cartridge into its bracket.
• Push down the ink cartridge as far as it
goes.
• Finally, push the ink cartridge back gently –
it will then tilt into the bracket.
• Insert the second ink cartridge in the same
way.