FP PostBase One Operator's Manual page 110

110
PostBase One Franking System
Caution! Do not touch the nozzle surface.
Always keep unprotected nozzles facing
down. Handle cartridges without nozzle
protection with extreme care.
• Carefully remove the nozzle protection.
• Hold the print head with its connectors
facing backwards, i.e. towards the back of
the franking system.
• Insert the print head into its bracket.
• Push down the print head as far as it goes.
• Finally, push the print head back gently – it
will then tilt into the bracket.
• Insert the second print head in the same
way.