FP PostBase One Operator's Manual page 136

136
PostBase One Franking System
Issue
Error message:
"FSCP connection plug
missed ..."
Print DX Reporting.
Print PPI Reporting.
Printed Postage Impressions
(PPI) are missing in the
PC software (e.g. Navigator-
Basic).
...
with downloading postage
Desired amount cannot be
loaded.
Function not available.
PostBase One fails to
establish connection to the
data centre.
Possible cause and remedy
Verify that the FSCP plug (termination plug) has
been connected to the FSCP interface correctly
(see page 168).
Verify that all connection cables between the sys-
tem components have been plugged in and
screwed correctly (see page 168).
On the PostBase One, there is no printing function
available for the DX Report.
Please use the PC software for printing DX
Reports: PostBase Menu
There is no printing function for the PPI Report.
The PC software does not support the PPI feature.
Terminate the connection between the PC soft-
ware and PostBase One.
Use PPI feature as described in chapter 9.
Impermissible amount.
Change amount and repeat the procedure.
The current user is not authorised to access this
function.
Contact the system administrator.
Verify that the network cable is properly connected
(see page 168).
Check the connectivity settings (see chapter 14.8,
page 89).
Repeat the procedure.
Data centre issue. Try again later.
DX Statistics Print.