Operation
Programmed Operation
Rotor Conversion
Calculates time required to duplicate run conditions using a different rotor and tube combination.
To enter a substitute rotor speed:
1
Select
Substitute Rotor Run
2
In the First Rotor Information area (see
original protocol. The minimum tube radius and maximum tube radius (in millimeters) from
the axis of rotation will be displayed if the tube selected is in the Tube Catalog.
Figure 2.19 Substitute Rotor Screen
3
Enter the speed and time of the run to be duplicated (also in the First Rotor Information area).
4
In the Substitute Rotor Information area, enter the new rotor and tube combination.
5
Enter the substitute rotor speed.
2-22
from the Setup menu.
Figure
2.19), enter the rotor and tube used in the
PN LXP-IM-7AB