DOOR
ROTOR CHAMBER
Drive
Spindle
Safety
Plate
The meanings of the diagnostic messages, as well as appropriate
actions to take, are discussed in Section 4:
.
AND MAINTENANCE
The chamber door is made of high-strength structural steel. A
solenoid interlock prevents it from being opened during operation.
The door can be opened only by using the door handle and only if the
power is on and the vacuum is off, with the chamber at atmospheric
pressure. Refer to Section 4, for instructions on accessing the
chamber to retrieve a sample in case of a power outage.
The rotor chamber is made of aluminum, coated with a chemical-
resistant epoxy finish. The rotor drive spindle, radiometer, photoelec-
tric devices, and safety plate are visible in the bottom of the chamber
(Figure 1-2).
Figure 1-2. The Rotor Chamber
TROUBLESHOOTING
Photoelectric
Devices
Radiometer
Description
1-5