Adjustment Data Writing Failure; Figure 6-60 Overwrite Confirmation; Figure 6-61 Failed Data Save Error; Figure 6-62 Writing Error Screen - JCM GLOBAL VEGA Series Operation And Maintenance Manual

Calibration and Testing
allow saving the Calibration Data with its errors
onto the PC. Click on the "
(Figure 6-59 a) to retain the data for analysis. If
saving the data (Figure 6-59 b) is unnecessary
however, click on the "
(Figure 6-59 c) to discard the data.
Figure 6-59 Save As Screen
Figure 6-59 Save As Screen
When the same name file exist on the PC, the "Con-
firm Save As" Message (Figure 6-60) will appear to
confirm if overwriting is desired. Click "
Button (Figure 6-60 a) to overwrite the data
existing on the PC, or click "
ure 6-60 a) and rename the File Name.

Figure 6-60 Overwrite Confirmation

Figure 6-60 Overwrite Confirmation
The file saved in same name is already open when
Save
the " " Button is clicked, the "
read/ cannot make a data file
(Figure 6-61). In this case, the failed data is NOT
saved and terminate the procedure with clicking on
OK
the " " Button (Figure 6-61 a).

Figure 6-61 Failed Data Save Error

a
Figure 6-61 Failed Data Save Error

Adjustment Data Writing Failure

If the EEPROM writing fails, the "
data to EEPROM failed. Try again?
sage appears. Select and click on the "
Button (Figure 6-62
Button(Figure 6-62
P/N 960-100189R_Rev. 4 {EDP #148850}
VEGA™ Series Banknote Validator
Save
" Button
Cancel
" Button
b a
c
Yes
"
No
" Button (Fig-
b
a
Cannot
" Message appears
[Error] Writing
" Dialog Mes-
Yes
"
No
) or the " "
a
) to proceed action.
b

Figure 6-62 Writing Error Screen

a
Figure 6-62 Writing Error Screen
• Yes
Click on the " "
Start the EEPROM writing procedure again with the
Retrying the data writing to EEPROM
message "
the Blue Message Field (Figure 6-63 a).

Figure 6-63 Retrying Writing Message

Figure 6-63 Retrying Writing Message
• No
Click on the " "
Save the calibration result with the message "
data to EEPROM failed
(Figure 6-64 a).

Figure 6-64 Writing Failed Message

Figure 6-64 Writing Failed Message
Save As
The " " Screen will appear (Figure 6-65) to
allow saving the Calibration Data with its errors
onto the PC. Click on the "
(Figure 6-65 a) to retain the data for analysis. If
saving the data (Figure 6-65 b) is unnecessary
however, click on the "
(Figure 6-65 c) to discard the data. 
Figure 6-65 Save As Screen
Figure 6-65 Save As Screen
When the same name file exist on the PC, the
"Confirm Save As" Message (Figure 6-66) will
appear to confirm if overwriting is desired. Click
Yes
" " Button (Figure 6-66 a) to overwrite the
© 2016, JAPAN CASH MACHINE CO., LTD.
6 - 1 1
Section 6
b
Button
" in
a
Button
Writing
" in the Blue Message Field
a
Save
" Button
Cancel
" Button
b a
c