Banknote Fitness Requirements; Primary Features - JCM GLOBAL VEGA Series Operation And Maintenance Manual

Section 1
Caution: Make sure Interface
Harness connections to the Host
Machine are shorter than 3
Meters (9.84 Feet) in length. Cut
off all unused portions of the
Interface Harness wiring.

Banknote Fitness Requirements

The following Banknote types may not validate
correctly, or can cause a Banknote jam and/or dam-
age to the Unit's Transport Path. Banknotes exhib-
iting the conditions listed below and illustrated in
Figure 1-3 should be avoided:
•
Torn
•
Having excessive folds
•
Having excessive wrinkles
•
Dirty
•
Wet
•
Adhering foreign objects and/or oil
Figure 1-3 Unacceptable Banknotes
Damaged Banknotes
Wrinkled Banknotes
Curled Banknotes
Folded or Partial Banknotes
Figure 1-3 Unacceptable Banknotes

Primary Features

The VEGA contains the following primary fea-
tures:
•
The ability to replace an identical VEGA Unit
installation (e.g., a Unit having and SH
specification or a SD/SU specification) into a wide
range of target Host Machines by changing the
Bezel and the Cash Box stop location.
•
A single denomination can flow in reverse by
adding the VEGA-RC.
•
Any two (2) denominations can be recycled by
adding the VEGA-RC Twin Unit.
P/N 960-100189R_Rev. 4 {EDP #148850}
VEGA™ Series Banknote Validator
1 - 4
General Information
© 2016, JAPAN CASH MACHINE CO., LTD.