Adjustment - JCM GLOBAL WBA Series Maintenance Manual

Maintenance Manual
The acceptance rate can become worse as time goes by. This may not only result
in because of the acceptor's direct environment, but also because the parts are
getting older.
If the acceptance rate is still low after cleaning the acceptor, and no mechanical
problems are obvious, the sensors may need to be callibrated.(fig 5.).
In the unlikely event of continued malfunction please write down the
1. name of the product
2. serial number
3. Software Version
4. LED Blink Codes
and contact our Customer Support

5. Adjustment

There are two kinds of adjustment =>
Please note !
Please note the settings of the dipswitch, so that they can be repositioned to their
original settings, after the adjustment.
An adjustment is only possible if:
- the machine was cleaned!
- the head unit and the carrying unit are inserted and the acceptor is plugged in
- the face plate was removed.
Different accessories are needed in order to successfully carry out an adjustment
(details fig 6. accessories).
The adjustment paper is specifically fitted to the model and the width of the head
unit.
We therefore kindly ask you to check which adjustment paper you are using!
The adjustment is only possible if the adjustment paper is clean and undamaged.
Please handle the paper carefully, put it in a plastic bag, and store it in a lightproof
area.
QA-IF006 R02E Wartungsanleitung WBA_newLogo.doc
Japan Cash Machine Germany GmbH
WBA Series
Quick adjustment und PC supported adjustment
Page 10 of 16