Table of Contents
Advertisement
5
5.1
Setting Forms
step-by-step
Rugby 840, Applications
Applications
Setting Forms
4
a
6
004800_001
Step Description
1.
Set up the Rugby on a tripod.
2.
Set up the tripod on a stable surface outside the working area.
3.
Attach the receiver to a rod.
4.
Turn on the Rugby and the receiver.
5.
Set the base of the rod on a known point for the finished height of forms.
6.
Adjust the height of the receiver on the rod until the on-grade (centre-line)
position is indicated on the receiver by:
• the centre bar
• the green flashing LED
• a solid audio tone
• the digital display
7.
Set the rod with the attached receiver on top of the form.
8.
Adjust the height of the form until the on-grade position is again indicated.
9.
Continue to additional positions until the forms are levelled to the rotating
plane of the Rugby.
b
3
5
1 + 2
9
7
8
26
Hide quick links:
Advertisement
Table of Contents
