Setting Up The Tripod - Leica NA2 User Manual

Setting up the tripod

1. Loosen screws of tripod legs,
2. In order to guarantee a firm
NA2/NAK2-2.0.0en
Find Quality Products Online at:
1.
1.
1.
2.
2.
2.
pull out to required length and
tighten screws.
foothold sufficiently press the
tripod legs into the ground.
When pressing the legs into
the ground note that the force
must be applied along the
legs.
GlobalTestSupply
www.
When setting up the
tripod pay attention to a
horizontal position of the
tripod plate.
Large inclinations of the tripod
must be corrected with the
footscrews of the tribrach.
11
Careful handling of tripod
• Check all screws and bolts
for correct fit.
• During transport always use
the cover supplied.
Scratches and other
damages can result in poor
fit and measuring
inaccuracies.
• Use the tripod only for
surveying jobs.
Measurement preparation
.com
sales@GlobalTestSupply.com