Using The Milconfig Utility - Matrox 4Sight User Manual

92 Chapter 7: Additions to the Matrox 4Sight integrated unit

Using the MILConfig utility

You can also use the MILConfig utility to change the amount
of reserved DMA memory from the factory default value of 3.5
Mbytes. The MILConfig utility is located in the
M I \
ATROX MAGING
1. Run the MILConfig.exe utility. You will be presented with
the dialog box Mil Configuration. Select the Non-paged
memory tab.
Under the Current Settings section, you will be presented
with the present settings of the non-paged memory size
(DMA memory), as well as the computer memory size.
2. Under the New Settings section, type in the new amount
of non-paged memory (DMA memory) you wish to reserve.
3. Click OK.
directory.
MILCONFIG