Display Components - Matrox 4Sight User Manual

138 Appendix B: NTConfig Windows NT Embedded registry

Display components

Manually change some keys in the registry to change the
display driver resolution of your Matrox 4Sight unit. These
keys have been initialized to a default value. The display
resolution setting can be found in the following registry keys:
Registry Keys
HKEY_LOCAL_MACHINE\
SYSTEM\CurrentControlSet\
Hardware Profiles\Current\
SYSTEM\CurrentControlSet
\Services\GX\Device0\
DefaultSettings.Xresolution
HKEY_LOCAL_MACHINE\
SYSTEM\CurrentControlSet\
Hardware Profiles\Current\
SYSTEM\CurrentControlSet
\Services\GX\Device0\
DefaultSettings.Yresolution
HKEY_LOCAL_MACHINE\
SYSTEM\CurrentControlSet\
Hardware Profiles\Current\
SYSTEM\CurrentControlSet
\Services\GX\Device0\
DefaultSettings.Vrefresh
HKEY_LOCAL_MACHINE\
SYSTEM\CurrentControlSet\
Hardware Profiles\Current\
SYSTEM\CurrentControlSet
\Services\GX\Device0\
DefaultSettings.BitsPixel
Setup
Set DWORD to one of the
following X resolution
values: 640, 800, 1024, 1280.
Set DWORD to one of the
following Y resolution
values: 480, 600, 768, 1024.
Set DWORD to one of the
following vertical refresh
rate values: 60, 70, 72, 75.
Set DWORD to one of the
following bits per pixel
values: 8,16.