Matrox 4Sight User Manual page 82

82 Chapter 6: Using the hard drive based Matrox 4Sight
M-Systems DiskOnChip driver
To install the M-Systems DiskOnChip driver, follow these
steps:
1. Right-click on the trueffs.inf file in the
\DRIVERS\WINNT\DISKONCHIP directory of the
Matrox 4Sight CD.
2. Choose Install from the list of menu items.
3. Reboot your PC.
Windows NT will restart with the DiskOnChip mapped to C:\.
Note that leaving the DiskOnChip mapped to the C:\ will cause
Windows NT Workstation to store the paging file on the
DiskOnChip. Since the paging file is written frequently, this
can lead to early wearing on the DiskOnChip.
To set the DiskOnChip to any letter other than C:\, you should
follow these steps:
1. Access the Disk Administrator tool, which is located
under the Administrative Tools sub-menu list. The
Administrative Tools menu item is accessible from the
Start Programs menu.
2. Right-click on the disk (DiskOnChip) labelled C:.
3. Choose Assign Drive Letter... from the context menu
presented. The Assign Drive Letter dialog box appears.
4. Choose a drive letter that is not currently assigned to a disk
from the drop-down list box.
5. Reboot your PC to allow these changes to take effect.
Another drive (other than the DiskOnChip) will
automatically be assigned to C:\, but the DiskOnChip will
retain the most recent drive letter assignment.
6. Optionally, you can then reassign the DiskOnChip's drive
letter assignment by repeating steps 1 through 4 using a
more appropriate drive letter.
Note that you will not have to reboot your PC this time.
Changes will take effect immediately once the disk/drive is
reassigned, since you are not changing the location of the