Matrox 4Sight User Manual page 136

136 Appendix B: NTConfig Windows NT Embedded registry
HKEY_LOCAL_MACHINE\
SYSTEM\CurrentControlSet\
Services\DAVICOM2\
Parameters\TcpIp\
EnableDHCP
\SYSTEM\CurrentControlSet\
Services\Tcpip\Parameters\
Domain
Ethernet connection type
Manually change one key in the registry to set the Ethernet
connection type required by your LAN. This key has been
initialized to a default value and is available to all users on the
computer. The connection type setting can be found in the
following registry key:
Registry Keys (INTEL
Ethernet)
HKEY_LOCAL_MACHINE\
SYSTEM\CurrentControlSet\
Services\E100E1\
Parameters\
Speed
HKEY_LOCAL_MACHINE\
SYSTEM\CurrentControlSet\
Services\E100E1\Parameters\
ForceDpx
Set DWORD to 0 or 1. Use 1
to activate the DHCP.
Set STRING to a string
representing the machine
domain name.
Setup
Set DWORD to one of the
following values:
0 for auto-negotiation;
maximum output.
10 for forced without
advertising 10 Mbits
100 for forced without
advertising 100 Mbits
Set DWORD to one of the
following values:
0 for auto-negotiation;
maximum output
1 for forced without
advertising half duplex
2 for forced without
advertising full duplex