Using This Manual - Matrox 4Sight User Manual

More information
Problems?

Using this manual

This manual begins with a brief introductory chapter and is
then divided into the following four parts:
The first part, comprised of Chapters 2 to 5 inclusive, is
geared towards users who do not need to open the chassis,
since they will not need to make hardware or OS
modifications.
The second part, comprised of Chapters 6 and 7, is geared
towards users who will be buying the Matrox 4Sight
integrated unit, but need to install additional devices such
as floppy and CD drives or who require a different operating
system.
The third part, Chapter 8, is geared towards those users who
have purchased the Matrox 4Sight motherboard and will be
installing it in a custom chassis.
The final part, comprised of Chapters 9 and 10, as well as
Appendices A through E inclusive, is designed for all users
of Matrox 4Sight (unless otherwise specified).
For block diagrams and detailed hardware descriptions of
Matrox 4Sight and Matrox Meteor-II for PC/104-Plus, refer to
Chapters 9 and 10, respectively.
If you would like to know how to use the BIOS Setup program
to modify your Matrox 4Sight configuration, see Appendix C.
This appendix also lists BIOS beep codes and error messages.
The BIOS is accessed by pressing the Delete key prior to the
boot procedure.
Appendix D provides pin-out descriptions for connectors on the
Matrox 4Sight unit.
Appendix A offers solutions to potential problems. If your
Matrox 4Sight installation questions are not answered in this
manual, contact your local Matrox representative, Matrox
sales, or Matrox customer support; refer to the Customer
Support section at the back of this manual for our web address,