Matrox 4Sight User Manual page 137

Manually configuring the Windows NT Embedded registry
Registry Keys (DAVICOM
Ethernet)
HKEY_LOCAL_MACHINE\
SYSTEM\
CurrentControlSet\
Services\DAVICOM2\
Parameters\
ConnectionType
Computer name
Manually change some keys in the registry to set the computer
name required by your LAN. This key has been initialized to a
default value and is available to all users on the computer. The
computer name setting can be found in the following keys:
Registry Keys
HKEY_LOCAL_MACHINE\
SYSTEM\CurrentControlSet\
Control\ComputerName\
ComputerName\
ComputerName
HKEY_LOCAL_MACHINE\
SYSTEM\CurrentControlSet\
Control\ComputerName\
ActiveComputerName\
ComputerName
HKEY_LOCAL_MACHINE\
SYSTEM\CurrentControlSet\
Services\Tcpip\Parameters\
Hostname
Setup
Set DWORD to one of the
following values:
0 for auto-negotiation;
maximum output.
Forced with advertising:
2 for 10 Mbits half duplex
3 for 10 Mbits full duplex
8 for 100 Mbits half duplex
9 for 100 Mbits full duplex
Forced without advertising:
10 for 10 Mbits half duplex
11 for 10 Mbits full duplex
12 for 100 Mbits half duplex
13 for 100 Mbits full duplex
Setup
Set STRING to a string
representing the computer
name.
Set STRING to a string
representing the active
computer name.
Set STRING to a string
representing the computer
name of the development
computer.
137