The Bios Setup Program - Matrox 4Sight User Manual

150 Appendix C: BIOS reference
Entering the Setup
program

The BIOS Setup program

The BIOS Setup program allows you to modify certain
hardware settings. The default settings are suitable in most
cases, but under some circumstances, you might need to change
them.
Note that configuration settings are stored in CMOS memory
and backed up by a battery.
To enter the Setup program, turn on Matrox 4Sight and press
<Del>. You only have a few moments to press <Del> before the
boot-up process continues.
When you enter the Setup program, you will be presented with
the following options:
Basic CMOS Configuration
Advanced Configuration
Reset CMOS to Last Known Values
Reset CMOS to factory defaults
Write to CMOS and Exit
Exit without changing CMOS
Choose among the above options by using the Up or Down
arrow keys and pressing <Enter>. The first two options bring
up a subscreen where various fields allow you to modify the
Matrox 4Sight BIOS configuration. After making changes in
the subscreens, you can choose among the last four options.
The following sections describe the fields in each subscreen. To
make changes or move around these subscreens, refer to the
instructions given at the bottom of the subscreen.