Matrox 4Sight User Manual page 128

128 Appendix A: Troubleshooting
Alternatively, you can uninstall your Matrox software before
adding memory and reinstall the software after the memory
has been added. One of these procedures is necessary due to
the fact that these Matrox software packages reserve DMA
memory for grabbing.
Note that when running Windows NT Embedded, the
NTConfig utility will automatically recognize and handle
any additional memory. However, you can also use the
MILConfig utility to change the amount of reserved DMA
memory from the factory default value of 3.5 Mbytes.
Read/write errors occur when using the DiskOnChip.
Reinstall the DiskOnChip image file and start over.
Call Matrox for information concerning which M-Systems
products can be used to replace your current DiskOnChip.
Mismatched network settings resulting in very slow
communication.
Determine the server setting and configure Matrox 4Sight to
match these networks settings.