Matrox 4Sight User Manual page 79

Installing a full Windows NT Workstation on Matrox 4Sight
4. Click on the Have Disk button and then press the Browse
button to specify the path of the Geode display driver files;
they are located in the \DRIVERS\WINNT\DISPLAY
directory of the Matrox 4Sight CD.
5. Select the National (Matrox Modified) Geode entry in
the presented list box and click on the Ok button to start
the installation of the driver. You must reboot the computer
to use the new driver.
Geode IDE Ultra DMA driver
If you are using a hard disk that has Ultra DMA capabilities
and you want to access these capabilities, it is necessary to
install this driver.
To install the Geode IDE Ultra DMA Driver:
1. From the Control Panel, click on SCSI Adapters.
2. Select Drivers.
3. Select the ATAPI driver and then click on the Remove
button.
4. Click the Add button.
5. Click Have Disk... and select the Geode UDMA driver by
switching to the correct path of the Geode IDE drivers in
the \DRIVERS\WINNT\IDE directory of the Matrox
4Sight CD. The installation will ask you to identify the path
on two consecutive occasions.
6. Click Yes to restart your computer.
You will have to re-boot the computer for the new driver settings
to take effect.
Geode sound driver
To install the Geode sound driver:
1. From the Control Panel, click on the Multimedia icon. The
Multimedia Properties dialog box is presented.
2. Select the Devices property page and then select the
Audio Devices entry from the tree list.
79