Before You Begin - Matrox 4Sight User Manual

30 Chapter 2: Connecting and configuring external peripherals to the unit

Before you begin

This chapter describes how to connect and configure various
devices to the Matrox 4Sight integrated unit. Not all the
devices discussed here need to be configured. For those devices
that do need configuration, the information is included in the
device's respective section for ease of use and unity of
information.
The front and back panels of Matrox 4Sight provide connection
to:
A mouse and keyboard.
A VGA monitor.
A local area network (LAN).
A video input source.
An IEEE 1394-compatible camera or other peripheral
(3 ports).
A serial (2 ports) and/or parallel interface device.
Auxiliary I/O interface device.
NTSC/PAL/RGB video display devices, such as a TV monitor.
A stereo audio device.
Front panel
Ethernet
connector
TV (top)
and
VGA output (bottom)
Auxiliary I/O
connector (top) and
video input connector (bottom)
Audio input (top)
Parallel port (top)
and output (bottom)
and IEEE 1394
ports (bottom)
Back panel
Power
Connector
Serial
ports
Mouse (top) and
keyboard input (bottom)