Matrox 4Sight User Manual page 157

Options:
EPP 1.7 (default)
EPP 1.9
ECP (without EPP)
ECP (with EPP)
SPP Compatible
SPP Extended
Parallel Port Address:
This field specifies the I/O address of the parallel port. Two
communication port addresses are available to accommodate
software utilities that use either the 378h or 278h address
exclusively. You will have to select the other address for the
parallel port.
Options:
278h
378h (default)
Selected Aux I/O IRQ:
This field specifies which of the interrupt line (IRQ) you can
assign to the auxiliary I/Os on the Matrox 4Sight.
Options:
None (default)
IRQ3
IRQ4
IRQ5
IRQ7
IRQ9
IRQ10
IRQ11
Advanced Configuration subscreen 157