Handling Precautions - Matrox 4Sight User Manual

A DBHD44-TO-13BNC or DBHD44-TO-8BNC cable. Both of
these cables can interface to a Matrox Meteor-II /Standard
frame grabber for PC/104-Plus through the video input
connector on the Matrox 4Sight. Use a DBHD44-TO-8BNC
cable to interface to a Matrox Meteor-II/Multi-Channel frame
grabber for PC/104-Plus through the video input connector.
Three adapter cables for Y/C input (BNC-TO-SVHS) are
shipped with the DBHD44-TO-8BNC cable.
DH44-TO-13BNC/O input cable with a high density 44-pin
connector, available for the Matrox Meteor-II /Standard. This
cable is required if you want to connect to special input and
output signals, such as synchronization signals, control
signals, and DC power output.
A DBHD44-TO-8BNC/O cable. This is an open-ended version
of the DBHD44-TO-8BNC cable.
A DB9M-TO-4BNC cable. This cable is used to interface to
the TV output connector on Matrox 4Sight.

Handling precautions

Your Matrox 4Sight motherboard is sensitive to static
electricity and surges. To avoid damaging the motherboard,
follow these precautions:
Keep the motherboard in its protective bag until you are
ready to install it.
Drain static electricity from your body by touching a metal
fixture (or ground) before touching the motherboard.
Handle the motherboard by its edges.
Avoid letting your clothing come in contact with the
motherboard.
Handling precautions 25