Windows Ce Boot Options Section - Matrox 4Sight User Manual

WINDOWS CE BOOT OPTIONS section

1 Mb DMA blocks:
Specifies reserved DMA (physically contiguous) memory.
Options:
0 to 127 blocks of 1 Mbyte (default is 4 blocks)
Refer to the table below for examples of how to reserve blocks
of DMA memory.
64 KB DMA blocks:
Specifies reserved DMA (physically contiguous) memory.
Options:
0 to 15 blocks of 64 KB (default is 0)
Refer to the table below for examples of how to reserve blocks
of DMA memory.
Table 1: Reserving blocks of DMA memory
DMA Memory
Desired
4 Mbytes DMA
3.5 Mbytes DMA
Com Port:
This options allows you to set which port to use when
debugging Windows CE.
Options:
1 or 2 (default is 1)
Advanced Configuration subscreen
Blocks from 1 Mb
DMA option
4 Blocks
3 Blocks
Blocks from 64KB
DMA option
0 Blocks
8 Blocks
159