Removing The Matrox 4Sight Chassis - Matrox 4Sight User Manual

Removing the Matrox 4Sight chassis

To remove the Matrox 4Sight chassis:
Warning
1. Unplug the Matrox 4Sight power cord.
2. Remove the appropriate screws on the side of the back panel
3. With the Matrox 4Sight unit laid flat, place your hands on
Warning
of the Matrox 4Sight unit.
Parallel ports
1394
1
top of the chassis and slowly slide the chassis so that it
emerges from the back panel.
As you begin to slide the chassis out, you will be met with
some resistance. This is due to the connectors on the back
panel. Do not use excessive force to slide the chassis past
these connectors; this can damage the connectors. Instead,
ease the chassis past the connectors.
Removing the Matrox 4Sight chassis
Back panel
1
12 V
2.5 A
2
2 3 Power
Serial ports
Front panel
75