Table of Contents
Advertisement
66
Chapter 5: Managing the DiskOnChip
DiskOnChip
When you order a Matrox 4Sight unit with a DiskOnChip, it is
pre-loaded with the specified operating system (currently only
Windows NT Embedded). The version of Windows NT
Embedded included with the DiskOnChip is discussed in
Chapter 3: Managing the Matrox 4Sight under Windows NT
Embedded. The file system used on the DiskOnChip to store
Windows NT Embedded is the FAT16 file system. This file
system allows you to access all files on the DiskOnChip from
Windows NT Embedded, MS-DOS, or another DOS compatible
operating system.
BIOS Setup
By default, Matrox 4Sight's boot sequence has been configured
to try to boot first from the DiskOnChip, and then, secondly,
from the hard drive. The BIOS Setup program's "Boot order
section" allows you to configure the drives in the boot
sequence.The boot order determines the drive letter
assignment. Therefore, the DiskOnChip (D.O.C.) is usually
drive C:. If no DiskOnChip is present or you choose to boot from
a hard drive first, then the hard drive is drive C:.
The following table shows the directory structure of the
DiskOnChip.
Directory Location
C:\
C:\WINNT
C:\MIL
C:\MIL\EXAMPLES
C:\WINNT\SYSTEM32 All MIL-Lite DLLs
Files located in directory
Basic boot files
Operating system files
Redistribution version of MIL-Lite
A basic image capture example
application called mfocus.exe
Hide quick links:
Advertisement
Table of Contents
