Parallel port
The parallel port is PC/AT-compatible. It can operate in
enhanced parallel port (EPP) mode or extended capabilities
port (ECP) mode. The ECP mode is IEEE 1284 compliant. The
mode of operation, as well as the I/O address of the port, is
BIOS-selectable (see Appendix C for information on using the
BIOS Setup program).
Audio
Matrox 4Sight supports 16-bit stereo audio input and output.
You can connect to a stereo audio device through 1/8" mini audio
input/output jack. Note that this jack is designed for line
input/output operations and will not support speakers or
microphones.
Keyboard and mouse
Matrox 4Sight supports any PS/2-type keyboard and mouse.
Floppy drive
You can connect to the following types of floppy drives:
360 KB, 5.25"
720 KB, 3.5"
1.2 MB, 5.25"
1.44 MB, 3.5"
2.88 MB, 3.5"
Auxiliary I/Os
Matrox 4Sight features 20 discrete LVTTL compatible I/Os with
interrupt-generation capabilities. These I/Os must be assigned
a single interrupt which will be shared between the 20 I/Os.
Also, the interrupt line must be enabled in the BIOS.
I/O ports
107