Machine Name Check Feature - Matrox 4Sight User Manual

Manually configuring the Windows NT Embedded registry

Machine name check feature

The following registry key changes the machine name check
feature of NTConfig to enable or disable. When enabled,
NTConfig checks if the user has changed the machine name at
least once to a value different than the default one set at the
factory. Manually change the setting of this key:
Registry Keys
HKEY_LOCAL_MACHINE\
SOFTWARE\Matrox\
NTConfig\
MachineNameChanged
Setup
Set DWORD to 0 or 1. Use 0
to activate the machine
name check feature.
145