Boot Order Section; Miscellaneous Section - Matrox 4Sight User Manual

154 Appendix C: BIOS reference
DiskOnChip by default); however, boot-up time will be longer.
Therefore, if no hard drive is present, it is recommended that
you reconfigure the CMOS and set this field in the BIOS to
None.

BOOT ORDER section

Boot 1st:, Boot 2nd:, and Boot 3rd:
These fields specify the boot sequence. That is, Matrox 4Sight
will first search for an operating system on the drive specified
by Boot 1st:, then search the drive (or load the operating
system) specified by Boot 2nd:, and then search the drive (or
load the operating system) specified by Boot 3rd:.
The drive options are:
None
Drive A:
Drive 1
Drive 2
Drive 3
D.O.C. (DiskOnChip)
The default setting for Boot 1st: is D.O.C. and for Boot 2nd:
is Drive 1. Other fields are not set. The D.O.C. option is only
available for the Boot 1st: field. Drive A is not assigned a
boot field by default; however, you can assign it to the Boot
1st field.

Miscellaneous section

Video Memory:
This field allows you to reserve specific amounts of video
memory from the available external memory. Once you
reserve video memory, it is no longer counted as available
external memory. To determine the total available external
memory that remains, subtract the amount of video display
memory you allocated from the amount of processing
memory.