Ntsc/Pal/Rgb Video Output Device; Stereo Audio Device - Matrox 4Sight User Manual

NTSC/PAL/RGB video output device

You can connect to an NTSC/PAL/RGB video output device
(such as a TV monitor or VCR) through the TV output
connector. To interface such devices to the TV output connector,
use the optional DB9M-TO-4BNC cable. The four BNC
connectors are color-coded for the following output.
Wire
Red Analog Video Output: Red or Y
Green Analog Video Output: Green or C
Blue Analog Video Output: Blue or encoded
CVBS (used for composite NTSC/PAL)
White TTL Composite Sync
To output video to an NTSC/PAL/RGB device, you will need to
enable this type of video output in the BIOS. Under the
Encoder options section, you must configure the Standard
field and the Output mode field for your requirements.

Stereo audio device

You can connect to a stereo audio device through 1/8" mini audio
input/output jack. This jack is designed for line input/output
operations and will not support speakers or microphones.
NTSC/PAL/RGB video output device
Output
41