Table of Contents
Advertisement
Connecting to your
network
Peer-to-peer
connections
The available display modes are:
Display size
Available Colors Refresh Rates
640 x 480
256 colors
640 x 480
65536 colors
800 x 600
256 colors
800 x 600
65536 colors
1024 x 768
256 colors
1024 x 768
65536 colors
1280 x 1024
256 colors
LAN options
The Ethernet connector allows you to connect to a LAN in either
a 10BaseT or 100BaseT operation mode. To connect to a LAN
in 100BaseT mode, use an Unshielded Twisted Pair Category 5
(UTP5) cable. To connect to a LAN in 10BaseT mode, use a
UTP5 or UTP3 cable.
When connecting a Matrox 4Sight unit in a peer-to-peer
configuration, you will have to use a crossover network cable.
Build this special cable based on the following table using an
Unshielded Twisted Pair Category 5 (UTP5) cable. An RJ45
connector must be attached to each end of the crossover cable.
In the table, each row represents a wire of the cable.
LAN options
60, 72 or 75 Hz
60, 72 or 75 Hz
60, 72 or 75 Hz
60, 72 or 75 Hz
60, 70 or 75 Hz
60, 70 or 75 Hz
60 or 75 Hz
33
Hide quick links:
Advertisement
Table of Contents
