ENCODER OPTIONS section
Display Device
This field selects the display device.
Options:
CRT Only (normal display (VGA) monitor; default)
Encoder (composite and Y/C / RGB output)
Standard Flat Panel
Sharp Flat Panel
Resolution:
This field specifies the resolution of the encoder video output.
This choice does not affect the flat panel or CRT selections.
Options:
640 x 480
800 x 600 (default)
Scan Mode:
This field selects the scan mode of the encoder. In underscan
mode, the encoder displays pixels outside of the specified
resolution. In overscan mode, the encoder displays only the
pixels of the specified resolution. This choice does not affect
the flat panel selections.
Options:
Underscan (default)
Overscan
Standard:
This field allows you to define the video output standard of
the encoder. This choice does not affect the flat panel
selections.
Options:
NTSC (default)
PAL
Advanced Configuration subscreen
161