Overview; Custom Chassis - Matrox 4Sight User Manual

96 Chapter 8: Installing the Matrox 4Sight motherboard in a custom chassis

Overview

This chapter provides general guidelines for safely using the
Matrox 4Sight motherboard with a custom chassis, power
supply, and fan. Specific instructions should be found in the
documentation accompanying these modules; make sure to
read and follow these instructions.
If you purchased the Matrox 4Sight integrated unit, you can
skip this chapter.
™
If you purchased a Matrox Meteor-II for PC/104-Plus board,
refer to the accompanying documentation for information on
installing it on a Matrox 4Sight motherboard. General
™
guidelines for installing a PC/104-Plus board can also be
found in Installing a PC/104-Plus™ board of this manual.
Warning
To protect the Matrox 4Sight motherboard against static
electricity, follow the precautions given in Chapter 1.

Custom chassis

In general, you can use any chassis that complies with the EBX
form factor. Make sure the chassis provides clearance for all
motherboard components, particularly the SDRAM module
™
and any PC/104-Plus boards.
To avoid injury, be careful of sharp corners and rough edges
when mounting the chassis.